Email orders to dpratley@bigpond.net.au

Please send your name and Phone numbers for all orders

Emeter V2

Click here for data page

EMETER SET with RDU

Includes the items pictured:
* Emeter II
* RDU (remote data unit)
* Emeter II<>RDU Data Cable
* Emeter II Power Input Plug

The Emeter II supports the RDU by downloading log files to Emeter, Display of log files, Calculation of Thrust-Efficiency (if prop selected), Calculation of internal resistances... and much more. In addition, it can program Hyperion TITAN ESC, ATLAS Digital Servos, upcoming ATLAS ESC. It can drive servos or ESC via the dial on the face, or create automated test routines.

$354.70

EMETER & CABLES

HP-EM2,

 

Includes the items pictured:
* Emeter II
* Emeter II<>RDU Data Cable
* Emeter II Power Input Plug

$177.50

RDU UNIT

HP-EM2-RDU


Dimensions: 36 x 29 x 13.5mm
Weight: 26~28g according to wire length
- Logs remotely, or at bench while connected to Emeter
- Records internally: Ambient Temp, Height, Throttle, Current, Voltage, Watts
- Option External Sensors: Temp1, 2, and 3. Reliable Phase Tachometer for Brushless Motors.
- Can be connected to Emeter Suite Software for DL to display of Data on PC, or Configuration
- Sample rates from 4 samples per second to 8 seconds per sample
- Firmware upgradable by Emeter with SD card installed, or by PC application

$212.80

EMETER<>RDU DATA CABLE

HP-EM2-4PINCBL,

This data cable comes with the Emeter itself. As such, it is mainly for replacement or as a spare. Note that it is also used to program Hyperion TITAN ESC via the Emeter II.

$10.55

EMETER POWER INPUT CABLE

HP-EM2-4PINCBL,

This power input cable comes with the Emeter itself. As such, it is mainly for replacement or as a spare

$6.65

OPTION PHASE TACHOMETER for brushless motors

HP-EM2-TACHBL,

This one is a beauty! Just attach inline on one of the three brushless motor wires (solder up a male/female connector adapter for convenience) and log motor rpm extremely accurately throughout the motor run. You need to know how many magnets are in your motor to configure the RDU, but even if you don't know the Emeter can be connected and RDU rpm compared with the Emeter tach. Makes it a snap to set it up right, every time... And this unit is NOT plagued by the problems found in some other brands. It's rock solid!

$16.80

OPTION TEMP UNIT 1

HP-EM2-TMP1,

This unit connects directly to the RDU "Aux" port. Temps #2 and #3 then daisy-chain to Temp #1. Therefore purchase this one first, then temps 2&3 if desired.

Generous 25cm (10") cable length means a good reach even in larger models...

$17.65

OPTION TEMP UNITS 2 & 3

HP-EM2-TMP23,

The Temp#2 unit connects directly to Temp#1 unit, so Temp#1 is required to use these. Temp#3 connects to Temp#2. Temps 2 and 3 have cable length of 20cm each, so max reach of Temp#3 unit from RDU is about 70cm (~27").

$35.30

TITAN USB<>SERIAL ADAPTER

HP-TI-PRGUSB,

This adapter is only necessary if you've purchased RDU alone (i.e. you do NOT have EmeterII) You'll need it to connect your RDU to the Windows PC Emeter II Suite Software. The software allows you to configure the RDU via PC, Download, Store, and Display Log File results, and Bench Test live to PC using the RDU alone when desired.

$26.30

 

 
   


* Dave's toys for big boys ABN 11 897 988 085